Fibaro Smart Lighting Troubleshooting

Find solutions for common Fibaro smart lighting problems. Step-by-step guides to get your devices working again.

Browse 1 troubleshooting guide for Fibaro smart lighting. Each guide targets a specific problem — from initial setup and connectivity issues to performance drops and error codes — with step-by-step instructions, difficulty ratings, and estimated repair times. Select a guide below to start fixing your Fibaro device.

Fibaro was founded in 2010 in Poznan, Poland and quickly became one of the most advanced wireless smart home systems globally, selling Z-Wave devices across 6 continents in over 100 countries. In July 2018, Nice S.p.A. (an Italian home automation and security company) acquired Fibaro for approximate...

Troubleshooting Guides (1)

How Do I Install the Fibaro Dimmer 2 Bypass?

Device: Fibaro Dimmer 2 (All Models)

You need to install the Fibaro Dimmer 2 bypass module for LED bulbs. The bypass is needed when dimming LED bulbs below 50W total load — without it, LEDs may flicker, buzz, or not turn off completely. The bypass is a small module that wires in parallel with the light fixture inside the ceiling box. This guide covers why you need it and how to wire it.

hard 30 min 63 views

Official Fibaro Support Resources

Official Website Support Center