How to Install Yale Real Living Electronic Deadbolt

Overview

This guide walks you through installing the Yale Real Living Electronic Deadbolt on a standard door, programming access codes, and optionally connecting to your smart home platform. The Yale Real Living is a keypad deadbolt that does not require a WiFi module for basic operation — codes are programmed directly on the keypad.

Why This Happens in Real Homes

The Yale Real Living deadbolt installs like any deadbolt, then you program codes on the keypad and optionally add a Z-Wave or Zigbee module for a hub. In real installs alignment is everything, since a tight bolt drains batteries and jams. Fit it square, program a master code, then add a network module if you want hub control.

What's Included

• Installing Yale electronic deadbolt
• Push button lock installation
• Battery-powered deadbolt
• Keyless entry lock setup
• Yale Real Living installation

Got your materials ready? Here's what to check first.

Before You Start

• Electronic keyless entry needed
• Simple keypad lock preferred
• Battery operation desired
• Push-button convenience
• Reliable electronic lock

Tools & Requirements

Installation Steps

1

Check Installation Requirements

Verify door thickness 1-3/8 to 1-3/4 inches, check door material compatibility, make sure adequate clearance for keypad buttons.

2

Remove Old Deadbolt

Unscrew existing deadbolt components, remove latch assembly from door edge, and clean holes of debris and old lubricants.

3

Install Yale Latch

Insert Yale latch into door edge hole, adjust backset setting if necessary, make sure proper orientation for door swing direction.

4

Mount Exterior Keypad

Insert exterior keypad assembly through door hole, align with latch mechanism, make sure buttons are easily accessible and level.

Needed for this step

9 Inch Torpedo Level Magnetic, Shock-Proof Smal...

This helps complete the fix you are currently reading.

$6.99

View Needed Item

5

Install Interior Assembly

Connect interior assembly to exterior keypad using provided connecting hardware, make sure secure fit and proper cable routing.

6

Install Battery Power

Insert 4 AA alkaline batteries into interior compartment, verify correct polarity, check for power indicator confirmation.

7

Set Master Code

Using default programming sequence from manual, set new 4-8 digit master code, confirm programming with audio/visual feedback.

8

Program User Codes

Add individual user codes for family members, make sure each code is unique, test proper operation of each programmed code.

9

Install Strike Plate

Position strike plate on door frame, mark screw locations, chisel recess if needed, secure with long screws into frame studs.

10

Test Complete Operation

Test all programmed codes, verify keypad illumination, check auto-lock function if equipped, make sure smooth mechanical operation.

Installation Tips

Still stuck? This is usually the deeper cause below.

Need More Help? Yale Support

Note: The contact information below connects you directly to Yale's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.

How Does Yale Compare?

Before replacing your Yale device, see how it stacks up against alternatives in our full comparison guides.