How to Install Yale Smart Door Lock with Key

Overview

Yale Yale Smart Door Lock with Key setup takes under 15 minutes for most users — if you're stuck, the steps below target the specific points where installs stall.

This guide covers the installation of the Yale Smart Door Lock with Key — a smart deadbolt that retains a traditional key cylinder alongside the electronic keypad and app control. Setup includes door hardware installation, Yale Access app pairing, and optional WiFi bridge connection for remote access and integration with Alexa or Google Home.

What's Included

• Installing smart lock with key backup
• Yale keypad and key lock
• Dual access smart lock
• Key override smart lock installation
• Traditional key with keypad

Got your materials ready? Here's what to check first.

Before You Start

• Want smart lock with key backup
• Traditional key override needed
• Dual access method preferred
• Enhanced security with redundancy
• Smart lock with manual backup

Tools & Requirements

Installation Steps

1

Verify Door and Lock Compatibility

Check door thickness and material, verify backset measurement, ensure adequate clearance for both keypad and key cylinder operation.

2

Remove Existing Lock Hardware

Remove old deadbolt completely, clean door holes thoroughly, check for proper hole sizing and alignment with new lock.

3

Install Yale Latch Assembly

Insert latch into door edge, adjust for proper backset, ensure latch bolt orientation matches door swing direction.

4

Mount Exterior Assembly with Key

Insert exterior assembly with key cylinder through door, align with latch tailpiece, ensure key turns smoothly and keypad is level.

Needed for this step

9 Inch Torpedo Level Magnetic, Shock-Proof Smal...

$6.99

Get It on Amazon

5

Install Interior Assembly

Connect interior assembly to exterior using connecting screws, ensure proper cable connections for keypad functionality.

6

Insert Batteries

Install 4 AA alkaline batteries in interior compartment, verify correct polarity, check power indicators and keypad illumination.

7

Test Key Operation

Test key operation from exterior, verify smooth lock and unlock action, ensure proper key fit and turning action.

8

Program Keypad Codes

Set master code using default programming sequence, add user codes for family members, test each code for proper operation.

9

Install and Align Strike Plate

Position strike plate on door frame, ensure proper alignment with latch bolt, secure with appropriate length screws.

10

Complete Testing

Test both key and keypad operation, verify auto-lock function if equipped, check battery level indicator, ensure smooth operation.

Installation Tips

Still stuck? This is usually the deeper cause below.

Need More Help? Yale Support

Note: The contact information below connects you directly to Yale's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.

How Does Yale Compare?

Before replacing your Yale device, see how it stacks up against alternatives in our full comparison guides.