How to Install Your Ring Video Doorbell

Overview

This guide provides a comprehensive overview of the Ring Video Doorbell installation process. It covers both wired and battery-powered setups, mounting the device, connecting to your home Wi-Fi, and configuring it with the Ring app for immediate use.

Why This Happens in Real Homes

Ring's Video Doorbell installs two ways, and which you have decides the work: battery models just mount and charge, while wired models tie into an existing 8-24V AC doorbell transformer and use the included hardware for the chime. Either way it pairs to WiFi in the app.

For battery units, fully charge before mounting and use the level and wedge/angle mounts to aim at the walkway. For wired, cut power at the breaker first, confirm the transformer is 8-24V AC, and fit the supplied jumper/diode so your indoor chime still rings.

What's Included

• Ring Video Doorbell in the box
• Mounting Bracket and hardware
• USB Charging Cable for battery
• Installation Tools and Screws
• User Manual and Security Sticker
• Your smartphone for the Ring app

Got your materials ready? Here's what to check first.

Before You Start

• A compatible doorbell system (8-24V AC)
• A fully charged battery for wireless setup
• A stable Wi-Fi connection at your door
• Smartphone with the Ring app installed
• Power drill for mounting on hard surfaces
• Correctly turned-off circuit breaker

Tools & Requirements

Installation Steps

1

Charge and Set Up in App

Fully charge the Ring Doorbell's battery using the provided orange USB cable. While it charges, download the Ring app on your smartphone and create an account. In the app, select 'Set Up a Device' and scan the QR code located on the back of your Ring Doorbell.

2

Connect to Wi-Fi

Follow the in-app instructions to connect your Ring Doorbell to your home's Wi-Fi network. You will need to enter your Wi-Fi password. The light on the front of the doorbell will indicate the connection status, turning solid blue once successfully connected.

3

Physical Installation

For a wired installation, turn off power at the breaker. Remove your old doorbell and install the Ring mounting bracket. Connect the existing doorbell wires to the screws on the bracket. For battery power, install the bracket. Attach the Ring Doorbell to the bracket.

Needed for this step

DEWALT 20V MAX Cordless Drill and Impact Driver...

This helps complete the fix you are currently reading.

$139.00

View Needed Item

4

Finalize and Test

Secure the Ring Doorbell to the mounting bracket using the provided short security screws. Turn the power back on at the breaker if you performed a wired installation. Test the doorbell by pressing the front button and checking for a notification on your smartphone.

Installation Tips

Still stuck? This is usually the deeper cause below.

Need More Help? Ring Support

Note: The contact information below connects you directly to Ring's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.

How Does Ring Compare?

Before replacing your Ring device, see how it stacks up against alternatives in our full comparison guides.