How to Install SimpliSafe Entry Sensor
- Sensor Placement Planning
- Adhesive Mounting
- Magnet Positioning
- Sensor Registration
- Entry Delay Configuration
- Detection Testing
Most users complete this in under 15 minutes
Overview
SimpliSafe SimpliSafe Entry Sensor setup takes under 15 minutes for most users — if you're stuck, the steps below target the specific points where installs stall.
This guide covers the installation of SimpliSafe Entry Sensors on doors and windows, including adhesive mounting, magnet alignment, and pairing to the SimpliSafe base station. SimpliSafe entry sensors use a proprietary 433MHz protocol and pair directly to the SimpliSafe keypad and base station without requiring WiFi or additional hardware.
What's Included
- Door/window security sensor
- Magnetic detection setup
- 8-year battery life
- Entry point monitoring
Got your materials ready? Here's what to check first.
Before You Start
- Door and window monitoring
- Break-in detection
- Entry point security
- Perimeter protection
Don't skip this step — it breaks everything if you do
Ensure proper magnet alignment within 2 inches. Clean surfaces before adhesive mounting. Test detection range after installation.
Tools & Requirements
These tools will help you complete this fix.
Drill optional
DEWALT 20V MAX Cordless Drill and Impact Driver, Pow...
Level
9 Inch Torpedo Level Magnetic, Shock-Proof Small Lev...
Screwdriver
STREBITO 155 in 1 Electric Screwdriver Set, Small El...
As an Amazon Associate we earn from qualifying purchases.
Installation Steps
Sensor Placement Planning
Install Entry Sensor on door or window frame with magnet on moving part. Ensure alignment within 2 inches for reliable magnetic detection.
Adhesive Mounting
Clean surface and mount sensor using included 3M adhesive strips. Alternative screw mounting available for permanent installation or rough surfaces.
Magnet Positioning
Mount magnet piece on door or window ensuring proper alignment with sensor when closed. Test opening/closing to verify detection range.
Sensor Registration
Press test button on sensor to register with Base Station. LED will flash indicating successful addition to security system.
Entry Delay Configuration
Configure entry/exit delays through SimpliSafe app for doors that need time to disarm system. Windows typically set to instant alerts.
Detection Testing
Test sensor by opening and closing door/window while system armed. Verify proper detection and alert generation through app and Base Station.
Installation Tips
Still stuck? This is usually the deeper cause below.
Entry Sensors use magnetic detection with 8-year battery life. No wiring required with adhesive or screw mounting options.
Before you go — these SimpliSafe guides fix most remaining issues.
Most popular upgrades chosen by SimpliSafe Entry Sensor owners.
As an Amazon Associate we earn from qualifying purchases.
Official Manufacturer Manual
SimpliSafe provides official product documentation through their online manual rather than downloadable PDF. Access setup guides, troubleshooting steps, and product specifications for your SimpliSafe Entry Sensor.
Source: simplisafe.com
Need More Help? SimpliSafe Support
Note: The contact information below connects you directly to SimpliSafe's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.
How Does SimpliSafe Compare?
Before replacing your SimpliSafe device, see how it stacks up against alternatives in our full comparison guides.
