Back to Ring Guides
Ring

How to Install Ring Video Doorbell Pro 2 on Stucco With an Angled Wedge Kit

Ring GuideVideo Doorbells
medium difficulty 45-60 minutes 6 views 0 found helpful Updated
This guide applies to: Ring Ring Video Doorbell Pro 2 (Video Doorbell Pro 2)
Quick Setup (Do This First)
  • Kill Power and Check Transformer
  • Mark the Wedge Position
  • Drill and Anchor
  • Wire and Mount
  • Restore Power and Setup

Most users complete this in under 60 minutes

Expert Review & Technical Scope

DeviceRing Ring Video Doorbell Pro 2
Model CoverageVideo Doorbell Pro 2
Fix Time45-60 minutes
DifficultyMedium
Required Toolshammer drill, masonry drill bit, stucco anchors, level
Network / ProtocolWi-Fi / app-based troubleshooting context

Overview

Stucco surfaces need the right anchors and a wedge kit to aim the camera. This guide covers drilling stucco safely, anchoring the wedge, and wiring the Pro 2 to a 16-24VAC transformer.

Why This Happens in Real Homes

Stucco surfaces need the right anchors and a wedge kit to aim the camera. This guide covers drilling stucco safely, anchoring the wedge, and wiring the Pro 2 to a 16-24VAC transformer. In day-to-day use, this usually looks like Existing doorbell wires at stucco entry; Need angled view of porch; Transformer rated 16-24VAC.

Most cases trace back to Using wood screws without anchors; Transformer underpowered for Pro 2; Holes drilled too close to edge. The fix works best when you go step by step instead of changing multiple settings at once.

A practical order for this issue is: Kill Power and Check Transformer -> Mark the Wedge Position -> Drill and Anchor -> Wire and Mount. After each step, test the exact behavior that was failing so you can confirm what actually solved it.

What's Included

  • Existing doorbell wires at stucco entry
  • Need angled view of porch
  • Transformer rated 16-24VAC
  • Wedge kit included
  • WiFi signal present at door
  • Old doorbell removed

Got your materials ready? Here's what to check first.

Before You Start

  • Using wood screws without anchors
  • Transformer underpowered for Pro 2
  • Holes drilled too close to edge
  • Wires short or brittle
  • Wedge mounted upside down
  • Mount not leveled before drilling

Don't skip this step — it breaks everything if you do

Warning

Wear eye protection when drilling stucco and keep the drill steady to avoid cracking the finish.

Tools & Requirements

hammer drillmasonry drill bitstucco anchorslevelvoltage testerphillips screwdriver

Installation Steps

1

Kill Power and Check Transformer

Turn off power at the breaker and verify the transformer outputs 16-24VAC. Replace an underpowered transformer before mounting the doorbell.

2

Mark the Wedge Position

Hold the wedge kit in place and use a level to align it. Mark the screw holes and wire exit. Painter tape makes marks visible on textured stucco.

9 Inch Torpedo Level Magnetic, Shock-Proof Small Level Tool with 45/90/180 Degree Bubble Vials, Aluminium Alloy Frame, V-Groove and Magnet Track

Needed for this step

9 Inch Torpedo Level Magnetic, Shock-Proof Smal...

$6.99
Get It on Amazon
3

Drill and Anchor

Drill pilot holes with a masonry bit, then insert stucco anchors. Avoid drilling near edges where stucco can crack.

Milwaukee Electric - 10PC. Shockwave Impact Duty Carbide Hammer Drill B

Needed for this step

Milwaukee Electric - 10PC. Shockwave Impact Dut...

$37.97
Get It on Amazon
4

Wire and Mount

Connect the doorbell wires to the Pro 2 terminals. Attach the wedge to the wall, then mount the doorbell on the wedge and secure the faceplate.

5

Restore Power and Setup

Restore power and complete setup in the Ring app. Verify live view, motion zones, and chime operation before final tightening.

Installation Tips

Use masonry anchors for stucco
Verify 16-24VAC 30VA transformer
Pre-drill with a masonry bit
Extend wires with a connector kit
Use the included wedge for angle
Test video before final tightening

Still stuck? This is usually the deeper cause below.

Pro Tip

Use painter tape to mark holes and catch drill dust. It keeps the stucco surface cleaner during drilling.

Official Manufacturer Manual

If you need the complete manufacturer documentation for advanced setup, wiring diagrams, or detailed specifications, you can download the official manual below. The manual includes full technical instructions directly from the manufacturer and may help if your issue requires deeper troubleshooting.

Download the Official Ring Video Doorbell Pro 2 Manual

Source: ring.com

Need More Help? Ring Support

Note: The contact information below connects you directly to Ring's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.