Back to Wyze Guides
Wyze

How to Install Wyze Lock Bolt

Wyze GuideSmart Locks
hard difficulty 45-75 minutes 168 views 3 found helpful Where this fix applies: US, Canada Updated
This guide applies to: Wyze Wyze Lock Bolt (Lock Bolt, Smart Lock Bolt)
Quick Setup (Do This First)
  • Door Compatibility Check
  • Remove Existing Deadbolt
  • Install Bolt Mechanism
  • Exterior Keypad Installation
  • Interior Assembly Setup
  • Wyze App Configuration

Most users complete this in under 75 minutes

Expert Review & Technical Scope

DeviceWyze Wyze Lock Bolt
Model CoverageLock Bolt, Smart Lock Bolt
Fix Time45-75 minutes
DifficultyHard
Required ToolsScrewdriver, Drill (optional), Level, Smartphone with brand app
Network / ProtocolBluetooth

Overview

Wyze Wyze Lock Bolt setup takes under 15 minutes for most users — if you're stuck, the steps below target the specific points where installs stall.

This guide covers the installation of the Wyze Lock Bolt, a Bluetooth fingerprint deadbolt that replaces your existing deadbolt with biometric and app-based access. Installation includes door hardware removal, Wyze Lock Bolt mechanical installation, fingerprint enrollment, and Wyze app pairing for access logs and additional PIN code management.

Why This Happens in Real Homes

The Wyze Lock Bolt is a full deadbolt replacement with a fingerprint reader, not an add-on over your existing lock, so compatibility is the first thing to confirm: a 1.375-2 inch door with a standard bore and the right backset. Most installs are a quick screwdriver job once that's verified.

It pairs over Bluetooth (no WiFi radio), so keep your phone's Bluetooth on during setup, and don't skip the in-app calibration — the lock needs to learn its locked and unlocked positions. If the bolt binds, fix the strike alignment rather than forcing it; a bolt that drags will chew through batteries and eventually fail to lock.

What's Included

  • Unsure if your door fits the Lock Bolt
  • Removing the old deadbolt
  • Bolt binds or will not turn smoothly
  • Keypad not aligning with the bolt
  • Batteries or interior assembly issues
  • App will not pair over Bluetooth
  • Auto-lock not set up
  • Fingerprint enrollment unclear

Got your materials ready? Here's what to check first.

Before You Start

  • Door thickness or backset outside spec
  • Old deadbolt hardware not fully removed
  • Bolt misaligned with the strike plate
  • Interior and exterior halves not seated together
  • Batteries not making contact
  • Bluetooth off during pairing
  • Calibration skipped in the app
  • Strike plate hole too tight for the bolt

Don't skip this step — it breaks everything if you do

Warning

Requires 4 AA batteries for operation. Bluetooth range limited without Wi-Fi bridge. Test fit before removing existing lock.

Tools & Requirements

ScrewdriverDrill (optional)LevelSmartphone with brand app

Installation Steps

1

Door Compatibility Check

Verify door thickness (1.375"-2") and deadbolt hole size compatibility. Wyze Lock Bolt fits standard deadbolt preparations in most doors.

2

Remove Existing Deadbolt

Remove current deadbolt lock completely including exterior and interior components. Keep screws as some may be reused with Wyze Lock Bolt.

3

Install Bolt Mechanism

Insert Wyze Lock Bolt mechanism into door hole ensuring proper alignment. Secure with included screws and verify smooth bolt operation.

4

Exterior Keypad Installation

Mount exterior keypad assembly ensuring proper alignment with bolt mechanism. Test keypad responsiveness and secure mounting.

5

Interior Assembly Setup

Install interior assembly with battery compartment and manual controls. Insert batteries and make sure proper connection with bolt mechanism.

6

Wyze App Configuration

Set up Lock Bolt in Wyze app via Bluetooth connection. Program access codes, configure auto-lock settings, and test remote lock/unlock functions.

Installation Tips

Confirm a 1.375-2 inch door and correct backset
Remove all old deadbolt components, reuse screws if noted
Align the bolt so it throws smoothly by hand
Seat the exterior keypad and interior assembly together
Insert batteries and confirm the connection
Pair over Bluetooth with it enabled on your phone
Run app calibration for locked/unlocked positions
Enlarge a tight strike hole so the bolt is not forced

Still stuck? This is usually the deeper cause below.

Pro Tip

Lock Bolt operates on batteries with keypad and app control. Bluetooth connection for app features with optional Wi-Fi bridge for remote access.

Official Manufacturer Manual

Wyze provides official product documentation through their online manual rather than downloadable PDF. Access setup guides, troubleshooting steps, and product specifications for your Wyze Lock Bolt.

View Wyze Lock Bolt Online Manual

Source: wyze.com

Need More Help? Wyze Support

Note: The contact information below connects you directly to Wyze's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.

How Does Wyze Compare?

Before replacing your Wyze device, see how it stacks up against alternatives in our full comparison guides.