Back to Amcrest Guides
Amcrest

How to Install Amcrest IP8M-DLB2998EW-AI Dual-Lens 4K Camera

Amcrest GuideSecurity Cameras
hard difficulty 60-80 minutes 125 views 3 found helpful Where this fix applies: Global Updated
This guide applies to: Amcrest Amcrest IP8M-DLB2998EW-AI Dual-Lens Camera (IP8M-DLB2998EW-AI, IP8M-DLB2998W-AI)
Quick Setup (Do This First)
  • Dual-Lens Camera Planning
  • Panoramic Mounting
  • Dual-Lens Power Setup
  • Panoramic View Configuration
  • AI Detection Setup
  • Multi-Lens Calibration

Most users complete this in under 80 minutes

Expert Review & Technical Scope

DeviceAmcrest Amcrest IP8M-DLB2998EW-AI Dual-Lens Camera
Model CoverageIP8M-DLB2998EW-AI, IP8M-DLB2998W-AI
Fix Time60-80 minutes
DifficultyHard
Required ToolsScrewdriver, Drill (optional), Level, Smartphone with brand app
Network / ProtocolWi-Fi / app-based troubleshooting context

Overview

Amcrest Amcrest IP8M-DLB2998EW-AI Dual-Lens Camera setup takes under 15 minutes for most users — if you're stuck, the steps below target the specific points where installs stall.

This guide covers the installation of the Amcrest IP8M-DLB2998EW 4K AI dual-lens outdoor camera, which combines a wide-angle and telephoto lens in one housing. Setup includes PoE wiring, dual-stream recording configuration, and AI person or vehicle detection setup through the Amcrest Smart Home or Amcrest View Pro app.

Why This Happens in Real Homes

The Amcrest IP8M-DLB2998EW is an AI dual-lens 4K camera — two lenses give a wider or dual field of view from one unit — which means a higher power draw, so adequate PoE (PoE+ for a dual-lens 4K device) matters more than on a single-sensor camera. It's an outdoor PoE install with weatherproofing.

Run an outdoor-rated Ethernet cable from an adequate PoE+ source, weatherproof the connector, and mount the camera to cover the wide area the dual lenses are meant for. Add it to Amcrest View Pro by P2P or to your NVR with the correct IP, protocol, and credentials, install any firmware, and configure the dual-lens views and AI detection in the settings. Enough PoE for the dual-sensor unit is the main install consideration.

What's Included

  • Installing the IP8M-DLB2998EW dual-lens
  • PoE power questions (dual-lens 4K)
  • No video/signal
  • Dual-view/stitching setup
  • Mounting outdoors
  • Adding to app/NVR
  • Offline after install
  • AI setup

Got your materials ready? Here's what to check first.

Before You Start

  • Inadequate PoE (dual-lens 4K needs more power)
  • Bad or too-long Ethernet cable
  • Unsealed outdoor connection
  • Not added to the app/NVR correctly
  • IP conflict/wrong protocol
  • Firmware update pending
  • Faulty PoE port
  • Dual-lens view/config not set

Don't skip this step — it breaks everything if you do

Warning

Complex installation requiring precise alignment. Higher bandwidth requirements for dual 4K streams. Professional mounting recommended.

Tools & Requirements

ScrewdriverDrill (optional)LevelSmartphone with brand app

Installation Steps

1

Dual-Lens Camera Planning

Plan installation considering 180° panoramic coverage area. Position to maximize wide-angle surveillance benefits without blind spots.

2

Panoramic Mounting

Mount dual-lens camera at best height for 180° coverage. Make sure mounting bracket can support wider camera profile.

3

Dual-Lens Power Setup

Connect via PoE+ for reliable power to both lenses and AI processing. Dual-lens operation requires adequate power supply.

4

Panoramic View Configuration

Configure dual-lens panoramic view in Amcrest software. Adjust lens alignment and stitching for smooth 180° coverage.

5

AI Detection Setup

Configure AI detection across panoramic field of view. Set up detection zones that span the full 180° coverage area.

6

Multi-Lens Calibration

Calibrate both lenses for consistent color, exposure, and focus across the panoramic view. Test alignment between lenses.

7

Wide-Area Monitoring

Set up monitoring zones and alerts for wide-area coverage. Configure different detection settings for various parts of panoramic view.

8

Dual-Lens Testing

Test both lenses individually and panoramic view features. Verify AI detection works across full 180° field of view.

Installation Tips

Provide adequate PoE (PoE+ for dual-lens 4K)
Use a good outdoor-rated Ethernet cable
Weatherproof the outdoor connection
Add the camera in Amcrest View Pro or to the NVR
Assign a unique IP and correct protocol/credentials
Install any firmware update
Try a different PoE port
Configure the dual-lens views and AI features

Still stuck? This is usually the deeper cause below.

Pro Tip

Dual-lens camera provides 180° panoramic coverage with two 4K lenses. AI detection works across full panoramic view. Advanced surveillance technology.

Official Manufacturer Manual

Amcrest provides official product documentation through their online manual rather than downloadable PDF. Access setup guides, troubleshooting steps, and product specifications for your Amcrest IP8M-DLB2998EW-AI Dual-Lens Camera.

View Amcrest IP8M-DLB2998EW-AI Dual-Lens Camera Online Manual

Source: support.amcrest.com

Need More Help? Amcrest Support

Note: The contact information below connects you directly to Amcrest's official customer support team, not Trunetto. They can help with warranty claims, device replacements, and advanced technical issues.